VENSYS STORAGE TECHNOLOGY
VENSTORE storage solutions are unique thanks to their modular structure and the associated, nearly limitless scalability. VENSTORE storage systems and VENSYS VENCON inverters guarantee high power density and versatility. Equipped with proven technology and innovative network management capabilities, this system solution is available in both, an indoor and outdoor cabinet.
VENSYS VENSTORE LION
The innovative VENSYS VENSTORE LION storage technology is the final step towards independent power supply. Based on the most progressive lithium-ion technology, characterised by multi-megawatt performance reserves and a higher temperature range, the VENSTORE LION has a multitude of application options. VENSYS storage solutions stand for intelligent and future-proof technology on a global standard.
The VENSTORE Lion storage system is available in an indoor and outdoor cabinet. Thanks to its multiple application cases this system provided a high degree of flexibility.
THE HIGHLIGHTS: POWERFUL
- Modular design and innovative IT management provide high scalability
- Compact outdoor cabinet for flexibility and low overhead costs
- Excellent safety standard thanks to protective features and optimal monitoring
- Innovative Battery Management System
- Cell technology to highest industry standards
- Capacities up to 115k kWh per cabinet
- Optimised for wide climate range
- Connecting to VENSYS systems without additional inverters
VENSTORE LION Application cases
The amount of energy gained from volatile energy producers is often not in line with own energy needs. With VENSTORE Lion, excess energy can be stored and provided at a different point in time. Supply optimisations can also be enhanced.
POWER SUPPLY NETWORK
PROVISION OF ENERGY CONTROL
THE BMS SUPPLIES THE FOLLOWING INFORMATION:
NUMBER OF CYCLES
STATE OF CHARGE
STATE OF BATTERY HEALTH
|Number of DC/DC converters||2|
|IGBT Type||SKiiP4 Technology|
|Cell Type||LiFePO4 Lithium iron phosphate|
|Total weight||2.900 kg|
|Dimensions (WxDxH)||1.652 x 1.718 x 2.080 mm|
|Protection class battery cabinet||IP55|
|CONNECTIONS AC SECTION|
|Number of DC connections||1|
|Supply voltage range||750-1200 V|
|Short circuit protection per input||450 A (aR-Sicherung)|
|Max. current||330 A|
|Nominal power at charge||60 kW|
|Max. power at charge*||115kW|
|Nominal power at discharge||115 kW|
|Max. power at discharge*||250 kW|
|Charging time (30 % - 95 % SOC)||45 Min|
|Operating temperature range||-20 °C …+50 °C|
|Storage temperature range||-20 °C …+50 °C|
|Max. relative humidity||95.00 % (not condensing)|
|Max. installation height (altitude)||< 1.500 m (üNN)|
|Cooling system battery cabinet||Klimagerät|
|Cooling system power electronics||Luftgekühlt|
|Supply voltage||400 (3p) Vac|
|Supply voltage range||±10 %|
|Supply frequency||50/60 Hz|
|Self-consumption (standby / maximum)||20 W / 4600 W|
|External communication||Ethernet (Modbus TCP)|
|Battery-Split in case of errors||<120 V units|
|Short circuit protection||Installed, per battery unit|
|Manual circuit breaker||Installed, per battery string|
|Overvoltage protection category (self-supply)||Optional|
|Compliance||EN 55011:2009/A1:2010 / EN 61000-4-2|
*Depends on the calculated limit of the BMS. The BMS will reduce the performance with an increase of the resistance of the cell. This could happen at e.g. too low or too high temperature.
The All-rounder among the Converters
Bi-directional and specially engineered for peak shaving, optimization of internal consumption, emergency power, Microgrid and much more.
Modular: Expandability in steps of 150 kW means total power can be reached for all sizes, with several systems being linked via a DC bus.
Versatile Up to three completely different DC sources with 120 kW output each can be operated in a broad voltage range.
Easy to maintain: The modular design, air cooling and the ability to control the system remotely (Web Interface) make sure VENCON requires only a minimum amount of maintenance.
Flexible Thanks to its compact design VENCON is suitable for use in any location.